.0060 do not scale from this print .290 ref 7.37 flush to .005 [.13] max (see note 6) "a" "a" see note 4 c4 .200 ref 5.08 .020 ref 0.51 (no of pos x .100 [2.54]) .010 [.25] .100 ref 2.54 (no of pos -1) x .100 [2.54] 2 max sway (typ) .050 1.27 01 02 nssm-50-dv c1 .277 7.03 90 - 0 + 4 section "a"-"a" c-137-01-xxx c3 c2 ssm-1xx-xxx-dv-xx-xx-x-xx no of positions -02 thru -40 (per row) (see note 7) row specification -dv: double vertical (use nssm-xx-dv-xx) polarizing option -xx: position to be polarized (use pk-06-n) (see fig 7, sht 2) (not available with -be option) mounting option -lc: locking clip (use lc-05-tm)(see fig. 2)(see note 8) plating -s: selective gold (use c-137-01-s) -l: light selective gold (use c-137-01-l) -t: tin (use c-137-01-t) -f: flash selective gold (use c-137-01-f) -p: gold flashed palladium nickel (use c-137-01-p) -h: heavy gold (use c-137-01-h) -stl: selective tin/lead (use c-137-01-stl) -sm: selective gold/matte tin tails(use c-137-01-s) -lm: light selective gold/matte tin tails (use c-137-01-l) -tm: matte tin (use c-137-01-t) -fm: flash selective gold/matte tin tails (use c-137-01-f) option -a: alignment pin (see fig. 3, sht 2) (molded: use nssm-xx-dv-xx, 4 pos min) -p: pick & place pad (see note 5) (use ppp-01, see fig. 4, sht 2) -m: metal pick & place pad (see note 5) (use mpp-02, see fig. 5, sht 2) -k: polyimide film pad (pos 2 through 40 - see note 5) (use k-500-300, see fig. 6, sht 2) -tr: tape & reel (see fig 8, sht 2- 29 positions max) -be: bottom entry (only available on -dv) (for -dv see nssm-50-dv-xx) option .043 1.09 in-process .010 ref 0.25 (no of pos -2) x .100 [2.54] figure 2 -lc: locking clip option .056 ref 1.42 .050 1.27 2 max toe (any direction) lc-05-tm c z sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .100 c.l. double vertical smt socket strip by: ssm-1xx-xxx-dv-xx-xx-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 3/8/2000 2 1 sheet scale: 1:0.4 body: vectra e130i contact: phos bronze f:\dwg\misc\mktg\ssm-1xx-xxx-dv-xx-xx-x-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. pullout force to be: 1 lb min. 3. maximum cut flash: .010. 4. cut parts may or may not have notches 5. -p option: 4 position and under to be -t/r -m option: 3 position and under to be -t/r -k option: 3 position and under to be -t/r all other positions with -p, -m, -k options are to be tubed, unless -tr ordered by customer. 6. flush dimension must be inspected on both rows of assembly. 7. -40 max position available, -50 for stock only 8. due to the high amount of insertion force needed, the -lc option is not compatible with auto placement. samtec recommends manual placement for all assemblies with the -lc option. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision z
user direction of unreeling pocket not detailed (no of pos -2) x .100 [2.54] ref nssm-xx-dv-xx molded (4 position min) .050 1.27 dia. .038 ref 0.97 "s" .010 [.25] .395 ref 10.03 "r" ppp-01 figure 4 -p: pick & place pad "r" = no of pos x .100 [2.54] "s" even = "r"/2 - .1975 [5.017] "s" odd = "r"/2 - .2475 [6.287] .195 ref 4.95 .050 ref 1.27 "r" "s" .010[.25] .225 ref 5.72 mpp-02 "r" = no of pos x .100 [2.54] "s" = "r"/2 - .1195 [2.858] figure 5 -m: metal pick & place pad figure 7 polarizing positions .008 ref 0.20 .280 ref 7.11 pt-1-24-03-15 pt-1-24-01-103 01 02 71 72 "r" .256 6.50 "s" .010 [.25] figure 6 -k: polyimide film pad "r" = no of pos x .100 [2.54] "s" = "r"/2 - .128 [3.25] .295 7.49 figure 8 tape & reel view 58 01 02 57 figure 3 -a: alignment pin x sheet of .100 c.l. double vertical smt socket strip by: ssm-1xx-xxx-dv-xx-xx-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 3/8/2000 2 2 sheet scale: 1:0.4 f:\dwg\misc\mktg\ssm-1xx-xxx-dv-xx-xx-x-xx-mkt.slddrw revision z 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
